Product Description

1.5/2/2.5 inch Swivel Furniture Caster Wheel Castor with Top Plate
 

Wheel Material PP/PVC,PP/PU
Wheel Diameter 38*50*63mm
Wheel Width 22*25*30mm
Load Capacity 35/50/60kg
Load Height 60/73/90mm
Top Plate Size 60*43/45*30 70*51/53*35 92*65/73*45

  As a 20+years caster factory, we have exported to many countries, like US,EU,AU,CA……
  We had the honor to service TENTE,COSLON,Wal-mart,Grainger,Carrefour,Ausmart,Tesco,Auchan etc.
  We have a good after-sales service of normal use of the warranty for 1 year.
 

If you have any request about caster, pls feel free to contact us at anytime! We will try our best to help you to grow your business!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Wheel Material: PVC
Bearing Type: Ball Bearing
Kind: Rotating Wheel
Finish: Electrophoresis
Max Load Capactiy: 60kg
Brake: With Brake
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

pvc wheels

Are PVC wheels suitable for use in food processing or medical environments?

The suitability of PVC wheels for use in food processing or medical environments depends on several factors. Here’s a detailed explanation:

Food Processing Environments:

PVC wheels can be suitable for certain food processing environments, but there are considerations to keep in mind:

  • Regulatory Compliance:
  • In food processing environments, it is essential to comply with strict hygiene and safety regulations. PVC wheels used in these settings must meet relevant industry standards, such as certifications for food contact materials. It is crucial to ensure that the PVC material used in the wheels is food-grade and does not pose any health risks or contaminate the food products.

  • Chemical Resistance:
  • Food processing environments often involve the use of cleaning agents, sanitizers, and other chemicals. PVC wheels should be resistant to these substances to prevent degradation, corrosion, or contamination. Choosing PVC wheels with appropriate chemical resistance properties is vital to maintain their performance and integrity in food processing environments.

  • Easy to Clean:
  • PVC wheels used in food processing environments should be easy to clean and sanitize. Smooth surfaces without crevices or hard-to-reach areas facilitate thorough cleaning, reducing the risk of bacterial growth or food residue accumulation. Regular cleaning and maintenance protocols should be established to ensure the wheels remain hygienic.

Medical Environments:

In medical environments, PVC wheels may have certain suitability based on the following considerations:

  • Cleanliness and Sterility:
  • Medical environments require a high level of cleanliness and sterility. PVC wheels used in these settings should be easy to clean, non-porous, and resistant to contaminants. They should also be compatible with cleaning agents and disinfectants commonly used in healthcare facilities.

  • Non-Marking and Non-Scratching:
  • PVC wheels used in medical environments should be non-marking and non-scratching to prevent damage to floors, walls, or other surfaces. The wheels should be designed to minimize the risk of leaving marks or causing abrasions, ensuring the maintenance of a clean and professional environment.

  • Noise and Vibration:
  • In medical settings, minimizing noise and vibration can contribute to a calm and comfortable environment for patients and healthcare providers. PVC wheels with features such as smooth rolling, shock absorption, or noise-reducing properties can be beneficial in medical environments.

It is important to note that specific regulations and requirements may vary depending on the country, region, or facility. Consulting relevant industry guidelines, local health authorities, or seeking advice from suppliers specializing in wheels for food processing or medical equipment can provide further insights into the suitable PVC wheels for these environments.

Ultimately, the suitability of PVC wheels in food processing or medical environments depends on their compliance with industry regulations, hygiene requirements, chemical resistance, ease of cleaning, and other specific considerations related to the particular environment in which they will be used.

pvc wheels

Are PVC wheels resistant to chemicals and solvents?

PVC wheels have varying levels of resistance to chemicals and solvents depending on the specific formulation of the PVC material and the type of chemicals involved. Here’s a detailed explanation of PVC wheel resistance to chemicals and solvents:

  • Chemical Resistance:
  • PVC wheels generally exhibit good resistance to a wide range of chemicals, including acids, alkalis, salts, and many common industrial chemicals. They can withstand exposure to mild acids and alkalis without significant degradation or damage. PVC’s chemical resistance is particularly notable for non-aromatic hydrocarbons, such as aliphatic hydrocarbons (e.g., petroleum-based products).

  • Solvent Resistance:
  • While PVC wheels offer good resistance to some chemicals, their resistance to solvents can be more limited. PVC is susceptible to damage or swelling when exposed to certain organic solvents, such as ketones, esters, aromatic hydrocarbons, and chlorinated solvents. Solvents like acetone, benzene, toluene, and trichloroethylene can cause PVC to soften, deform, or dissolve.

  • Effect of Concentration and Exposure Duration:
  • The resistance of PVC wheels to chemicals and solvents can be influenced by factors such as the concentration of the chemical and the duration of exposure. Higher concentrations and longer exposure times may lead to increased degradation or damage to the PVC material. It is important to consider the specific chemical or solvent being used and its compatibility with PVC when evaluating the suitability of PVC wheels for a particular application.

  • Protective Measures:
  • In cases where PVC wheels may come into contact with chemicals or solvents, it is advisable to take protective measures to minimize potential damage. This can include using protective coatings, liners, or barriers to shield the PVC material from direct exposure. Additionally, promptly cleaning and rinsing the wheels after exposure to chemicals or solvents can help mitigate potential harm.

It is crucial to consult the manufacturer’s specifications and guidelines to determine the specific chemical resistance properties of PVC wheels, as the composition and additives in PVC materials can vary. Manufacturers may provide information on the compatibility of their PVC wheels with different chemicals and solvents, helping users make informed decisions regarding their suitability for specific applications.

If the application involves frequent or prolonged exposure to chemicals or solvents, alternative wheel materials with higher chemical resistance, such as polyurethane or stainless steel, may be more suitable.

pvc wheels

Can PVC wheels be used for outdoor applications?

PVC wheels can be used for outdoor applications, but their suitability depends on several factors. Here’s a detailed explanation of using PVC wheels for outdoor applications:

  • Weather Resistance:
  • PVC wheels have fair to good resistance against weather elements such as sunlight (UV rays), moisture, and mild temperature variations. They can withstand outdoor conditions to a certain extent, but prolonged exposure to harsh weather conditions, extreme temperatures, or direct sunlight can degrade the PVC material over time. In such cases, the lifespan of PVC wheels may be reduced, and their performance may be compromised.

  • Terrain and Surface:
  • The terrain and surface on which PVC wheels will be used should be considered for outdoor applications. PVC wheels are generally suitable for smooth and hard surfaces such as concrete or asphalt. They provide smooth rolling and maneuverability on these surfaces. However, for rough or uneven terrains, such as gravel or unpaved surfaces, PVC wheels may not offer the same level of performance and durability as wheels with more robust tread patterns or materials, like rubber or pneumatic wheels.

  • Load Capacity:
  • PVC wheels have varying load capacities depending on their design and construction. For light to moderate outdoor applications, PVC wheels can handle typical loads encountered in tasks like gardening, light equipment transport, or moving lightweight outdoor furniture. However, for heavy-duty or industrial outdoor applications involving substantial loads, it is advisable to consider wheels with higher load capacities, such as those made of rubber or metal.

  • Maintenance and Cleaning:
  • Outdoor environments can expose wheels to dirt, debris, and other contaminants. PVC wheels are generally easy to clean and maintain, requiring regular washing to remove accumulated dirt and debris. It is important to keep the wheel bearings lubricated and perform routine inspections to ensure the wheels are in good condition for optimal performance.

In summary, PVC wheels can be used for certain outdoor applications, particularly on smooth surfaces and for lighter loads. They offer fair weather resistance and are relatively easy to maintain. However, for more demanding outdoor conditions, rough terrains, or heavy loads, alternative wheel materials like rubber or pneumatic wheels may be more suitable due to their superior durability, traction, and load-bearing capabilities. The specific requirements of the outdoor application and the expected usage conditions should be considered when choosing PVC wheels or exploring alternative wheel options.

China Professional Furniture Swivel PP PVC PU Castor Caster Wheel with Total Brake  China Professional Furniture Swivel PP PVC PU Castor Caster Wheel with Total Brake
editor by CX 2024-03-06